RAD950.org
HANDHELD HF WEAK-SIGNAL DIGITAL MODE · 10M / 12M / 15M / 17M

Weak-signal DX from a handheld transceiver.

RAD950 is a standalone, GPS-synchronized 4-FSK digital mode engineered around the Radtel RT-950 Pro running open-source Ferrite firmware — no PC, no soundcard interface, no external TNC. Just an MCU, direct-PLL RF synthesis, linear USB RX, and a 13 KB streaming LDPC decoder.

HARDWARE VERIFIED 28.185 MHz USB
Modulation
4-FSK (Gray, 50 Hz)
Symbol Rate
12.5 baud (80 ms)
Slot Cycle
10.0 s (8.8 s burst)
FEC / Check
(184, 78) LDPC + CRC-14
Decode Floor
-15.3 dB blind / -18.3 dB ref
MCU Budget
12.6 KB < 13.3 KB RAM
600 Hz 8 × 225 Hz Subchannels (3.0 kHz USB Window) 2400 Hz
600
825
1050
1275
1500
1725
1950
2175

Hardware-First Architecture

Every layer of RAD950 maps directly to the RT-950 Pro's silicon and Ferrite's real-time safety invariants.

TRANSMIT · BK4829 #1

Direct-PLL 4-FSK

Steps the BK4829's 10 Hz PLL frequency registers (REG_38/39) at 0, +50, +100, +150 Hz paced by TMR5 with <0.5 ms VCO relock and 0.086 Hz RMS tone error — 100% constant-envelope RF power.

RECEIVE · SI4732 USB

Linear 3 kHz Passband

Captures the full 600–2,400 Hz audio passband linearly via SI4732 USB (up to 30 MHz) summed into ADC1, decoding multiple simultaneous weak signals without FM threshold or capture effects.

DSP · AT32F403A M4F

13 KB Streaming Decoder

4:1 decimation to 6 kHz, half-symbol sliding 512-pt FFT, spread acquisition across symbols 24..32 (zero DMA stalls), 8-track candidate follower with admission fairness, and (184, 78) LDPC BP.

TIMING & SAFETY

GPS Sync & Relay Guard

ATGM336H NMEA burst anchoring handles ±3.75 symbol skew. Break-before-make Omron G6K relay sequencing enforces ≤3 TX / 60 s and writes durable 64-byte CRC-32 QSOs to SPI flash.

3-Slot Contact Exchange & Linger

30 s nominal QSO

Designed for fast-fading 10m Sporadic-E openings. Two full 28-bit callsigns in RX frames let any station pounce cold without calling CQ first.

  1. SLOT 0
    A → ALL: CQ NQ6N FN31 (PWR)
    Station B decodes A's CQ and queues a directed report.
  2. SLOT 1
    B → A: RX K1ABC NQ6N -14 dB [ACK=0]
    A decodes B's report; A now owes B a confirmed R+RX.
  3. SLOT 2
    A → B: R+RX NQ6N K1ABC -11 dB [ACK=1]
    Both stations log once; A lingers 2 slots (20 s) to catch retries if ACK=1 fades.

64-Bit Wire Frame Layout

110 syms = 18 sync + 92 data

Three balanced 6-symbol 4-ary sync clusters (S0, S1, S2) with zero adjacent repeats bracket 92 Gray-coded LDPC symbols + CRC-14.

Type 0 — CQ Frame (64 bits)
T=01b
SENDER (28b)callsign
GRID415b
PWR4b
RSVD / EXT16b
Type 1 — RX / R+RX Frame (64 bits)
T=11b
SENDER (28b)callsign
RECIPIENT (28b)callsign
SNR5b
A2b

Includes optional 53-bit decorated identity extension for compound callsigns (PREFIX/BASE-SUFFIX, e.g., VE3/NQ6N-P) and bands 10m, 12m, 15m, and 17m (the RT-950 Pro's 18–30 MHz SI4732/BK4829 overlap).

Verified On-Hardware Progress

RT-950 PRO + FERRITE
Live On-MCU RX Decode — Real-time SI4732 USB capture decoded on AT32F403A with spread acquisition and zero DMA stalls.
Direct-PLL 10m TX Verified — Conducted 28.18605 MHz 4-FSK burst decoded cleanly (`0.086 Hz` RMS spacing, `+0.12 Hz` drift).
Durable Flash Journal & On-Radio Maps — 1,008 CRC-32 QSOs in SPI flash with built-in Stats & 18×18 Worked Grids map.
53-Bit Decorated Callsigns — Bounded wire reassembler supporting portable/prefix/suffix station identities.

We will send a magic sign-in link and 6-digit code to <call>@arrl.org.